TUC2 Site Information Form (site log) International GPS Service See Instructions at: ftp://igscb.jpl.nasa.gov/pub/station/general/sitelog_instr.txt 0. Form Prepared by (full name) : Kirill Palamartchouk Date Prepared : 2005-03-17 Report Type : UPDATE If Update: Previous Site Log : tuc2_20041014.log Modified/Added Sections : 13 1. Site Identification of the GNSS Monument Site Name : Technical University of Crete Four Character ID : TUC2 Monument Inscription : IERS DOMES Number : 12617M003 CDP Number : (A4) Monument Description : PILLAR Height of the Monument : 1.20 Monument Foundation : CONCRETE BLOCK Foundation Depth : 0.70 Marker Description : CENTER OF ANTENNA MOUNTING PLATE Date Installed : 2004-06-16T00:00Z Geologic Characteristic : BEDROCK Bedrock Type : SEDIMENTARY Bedrock Condition : FRESH Fracture Spacing : 1-10 cm Fault zones nearby : NO Distance/activity : (multiple lines) Additional Information : TUC2 site is installed and maintained by the : Geodesy and Geomatics Engineering Laboratory : of the Mineral Resources Engineering Department : of the Technical University of Crete, Chania, : Greece. 2. Site Location Information City or Town : Chania State or Province : Crete Country : Greece Tectonic Plate : Eurasian Approximate Position (ITRF) X coordinate (m) : 4744543.851 Y coordinate (m) : 2119411.870 Z coordinate (m) : 3686258.942 Latitude (N is +) : +353159.48 Longitude (E is +) : +0240414.01 Elevation (m,ellips.) : 00161.0 Additional Information : TUC2 site is located in the Technical : University of Crete Campus, Chania, Greece. 3. GNSS Receiver Information 3.1 Receiver Type : LEICA RS500 Satellite System : GPS Serial Number : 0080199 Firmware Version : 4.2 Elevation Cutoff Setting : 0 Date Installed : 2004-06-20T00:00Z Date Removed : CCYY-MM-DDThh:mmZ Temperature Stabiliz. : none Additional Information : 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS/GLONASS/GPS+GLONASS) Serial Number : (A20, but note the first A5 is used in SINEX) Firmware Version : (A11) Elevation Cutoff Setting : (deg) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : (multiple lines) 4. GNSS Antenna Information 4.1 Antenna Type : LEIAT504 NONE Serial Number : 212 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 000.0337 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : Leica supplied Antenna Cable Length : 30 Date Installed : 2004-06-20T00:00Z Date Removed : 2004-10-14T10:00Z Additional Information : Removed due to poor quality of data : (Satellite visibility problems in North : sector) 4.2 Antenna Type : LEIAT504 NONE Serial Number : 424 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 000.0343 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : Leica supplied Antenna Cable Length : 30 Date Installed : 2004-10-14T10:00Z Date Removed : CCYY-MM-DDThh:mmZ Additional Information : (multiple lines) 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) : (F8.4) Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : (deg; + is clockwise/east) Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5. Surveyed Local Ties 5.1 Tied Marker Name : R00 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : -0.200 dy (m) : 0.090 dz (m) : -1.003 Accuracy (mm) : Survey method : TRILATERATION/TRIANGULATION/LEVELLING Date Measured : 2004-06-18T00:00Z Additional Information : (multiple lines) 5.2 Tied Marker Name : R01 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : -8.300 dy (m) : 6.820 dz (m) : -0.704 Accuracy (mm) : Survey method : TRILATERATION/TRIANGULATION/LEVELLING Date Measured : 2004-06-18T00:00Z Additional Information : (multiple lines) 5.3 Tied Marker Name : R02 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : -0.650 dy (m) : 9.070 dz (m) : -0.864 Accuracy (mm) : Survey method : TRILATERATION/TRIANGULATION/LEVELLING Date Measured : 2004-06-18T00:00Z Additional Information : (multiple lines) 5.4 Tied Marker Name : R03 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 10.580 dy (m) : -4.750 dz (m) : -0.992 Accuracy (mm) : Survey method : TRILATERATION/TRIANGULATION/LEVELLING Date Measured : 2004-06-18T00:00Z Additional Information : (multiple lines) 5.5 Tied Marker Name : R04 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 5.600 dy (m) : -3.060 dz (m) : -0.949 Accuracy (mm) : Survey method : TRILATERATION/TRIANGULATION/LEVELLING Date Measured : 2004-06-18T00:00Z Additional Information : (multiple lines) 5.6 Tied Marker Name : R05 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : -0.270 dy (m) : -17.120 dz (m) : -0.541 Accuracy (mm) : Survey method : TRILATERATION/TRIANGULATION/LEVELLING Date Measured : 2004-06-18T00:00Z Additional Information : (multiple lines) 5.7 Tied Marker Name : SLR0 Tied Marker Usage : SLR, LOCAL CONTROL, GPS Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : -1.090 dy (m) : -16.450 dz (m) : -0.544 Accuracy (mm) : Survey method : GPS CAMPAIGN/TRILATERAT./TRIANGULATION/LEVELLING Date Measured : 2004-06-18T00:00Z Additional Information : (multiple lines) 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : (m) dy (m) : (m) dz (m) : (m) Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 6. Frequency Standard 6.1 Standard Type : INTERNAL Input Frequency : (if external) Effective Dates : 2004-06-16/CCYY-MM-DD Notes : (multiple lines) 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7. Collocation Information 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8. Meteorological Instrumentation 8.1.1 Humidity Sensor Model : HMP45A-P Humidity and Temperature probe Manufacturer : Vaisala Oyj, Finland Serial Number : X1540004 Data Sampling Interval : 180 Accuracy (% rel h) : 1 Aspiration : NATURAL Height Diff to Ant : +16 Calibration date : 2003-05-27 Effective Dates : 2003-09-01/CCYY-MM-DD Notes : (multiple lines) 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.1 Pressure Sensor Model : PTU200 Class A PTU transmitter Manufacturer : Vaisala Oyj, Finland Serial Number : X1550001 Data Sampling Interval : 180 Accuracy : 0.07 Height Diff to Ant : +13 Calibration date : 2002-04-11 Effective Dates : 2003-09-01/CCYY-MM-DD Notes : (multiple lines) 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.1 Temp. Sensor Model : HMP45A-P Humidity and Temperature probe Manufacturer : Vaisala Oyj, Finland Serial Number : X1540004 Data Sampling Interval : 180 Accuracy : 0.15 Aspiration : NATURAL Height Diff to Ant : +16 Calibration date : 2003-05-27 Effective Dates : 2003-09-01/CCYY-MM-DD Notes : (multiple lines) 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (deg C) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.x Other Instrumentation : (multiple lines) 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degradations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.x Signal Obstructions : (TREES/BUILDLINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Laboratory of Geodesy and Geomatics : Engineering, Mineral Resources : Engineering Department,Technical : University of Crete, Greece Preferred Abbreviation : TUC Mailing Address : Laboratory of Geodesy and Geomatics : Engineering, Mineral Resources : Engineering Department, Technical : University of Crete, 73100, Chania, : Greece Primary Contact Contact Name : Stelios P. Mertikas Telephone (primary) : +30-28210-37629 Telephone (secondary) : +30-28210-37633 Fax : +30-28210-37872 E-mail : mertikas@mred.tuc.gr Secondary Contact Contact Name : Xenophon A. Frantzis Telephone (primary) : +30-28210-37672 Telephone (secondary) : +30-28210-37633 Fax : +30-28210-37892 E-mail : xfratzis@mred.tuc.gr Additional Information : 12. Responsible Agency (if different from 11.) Agency : (multiple lines) Preferred Abbreviation : (A10) Mailing Address : (multiple lines) Primary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : (multiple lines) 13. More Information Primary Data Center : ASI Secondary Data Center : OLG URL for More Information : http://www.gavdos.tuc.gr Hardcopy on File Site Map : Y Site Diagram : Y Horizon Mask : Y Monument Description : Y Site Pictures : Y Additional Information : (multiple lines) Antenna Graphics with Dimensions LEIAT504 +-------+ <-- 0.1393 / + \ <-- 0.1282 L2 | + | <-- 0.1093 L1 +-----------------+-------------+------------------+ <-- 0.1020 TCR | | | | | | | | +-+--------------------------------------------------+-+ <-- 0.0380 +-------------------+-------------+--------------------+ | | | | +------x------+ <-- 0.000 BPA=ARP