[IGSMAIL-5218]: Another setting for tracking L2C

["Angelyn W. Moore" <Angelyn.W.Moore @ jpl.nasa.gov>]

******************************************************************************
IGS Electronic Mail      29 Sep 17:41:00 PDT 2005      Message Number 5218
******************************************************************************

Author: Angelyn Moore

Dear IGS Colleagues,

I apologize for following with another message, but another setting relevant for 
Trimble NetRS users who want to collect the prize(*) for the first L2C data 
submitted to the IGS has been brought to my attention.

In case the L2C signal is tested before the satellite is set healthy, to record 
the data, you must set "Ignore Health" for (at minimum) PRN 17 in the 
"Satellites - GPS Enable/Disable" area.  Be aware that this causes the data from 
the unhealthy satellite to be used internally in the receiver, for example in 
the position calculation, and there could be unforeseeable consequences. Consult 
the manual for complete information before deciding to set this option.  Note 
the IGS requests data from unhealthy satellites when possible.  See IGS 
Guideline # 2.2.21 in http://igscb.jpl.nasa.gov/igsnetwork/guidelines/guidelines.html

Best regards,
Angie

(*)We will think of something!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Angelyn W. Moore, Ph.D.            Deputy Director, IGS Central Bureau
 JPL/Caltech                               Angelyn.W.Moore @ jpl.nasa.gov
 4800 Oak Grove Dr. MS 238-540                   voice: +1 818 354 5434
 Pasadena CA 91109 USA