[IGSMAIL-5232]: L2C tracking demo/NetRS users

["Angelyn W. Moore" <Angelyn.W.Moore @ jpl.nasa.gov>]

******************************************************************************
IGS Electronic Mail      18 Oct 15:42:59 PDT 2005      Message Number 5232
******************************************************************************

Author: Angelyn Moore

Dear Colleagues,

Those of you with Trimble NetRS receivers who intend to take part in the IGS 
demonstration of tracking the L2C signal:

If you want to track L2C while the satellite is still marked unhealthy, you will 
need a firmware upgrade to version "Beta 0.40"

Without this upgrade, the NetRS does not track L2 on satellites set unhealthy. 
You can check L2 tracking on unhealthy satellites by setting "Ignore Health" for 
PRN 31, since it is currently set unhealthy but trackable on both L1 and L2 (but 
not L2C, of course).

You can obtain this firmware by contacting Brian_Frohring @ Trimble.com and 
requesting it.  Our best information at the moment is that the L2C signal might 
be turned on for testing around 22 Oct.

Many thanks to V. Andreatta (UNAVCO), D. Stowers (JPL), K. Miller (JPL), B. 
Frohring (Trimble) for identifying, testing, and correcting this issue.

Best regards,
Angie
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Angelyn W. Moore, Ph.D.            Deputy Director, IGS Central Bureau
 JPL/Caltech                               Angelyn.W.Moore @ jpl.nasa.gov
 4800 Oak Grove Dr. MS 238-540                   voice: +1 818 354 5434
 Pasadena CA 91109 USA  http://igscb.jpl.nasa.gov  fax: +1 818 393 6686